OPEK LP-350: A/B connectors, PEP power and accurate configuration
To buy an OPEK LP-350 for an existing antenna line, you need to determine the specific configuration, connections and mode of operation of the equipment. In the list provided, the position is simply called LP-350. We will analyze what data to add to this title to get the subject quotation and accept the appropriate product.
LP-350 in the list and manufacturer's options
Our card and dated equipment list use the designation LP-350 without the last letter. Nana Official website of OPEK LP-350A / LP-350B The manufacturer distinguishes between two types of connectors: A has SO-239 on both sides, B has PL-259 and SO-239. This difference affects the composition of the connection to the existing cables.
Therefore, the name from the price is saved as the starting point of the request, and not automatically converted to LP-350A. The proposed suffix, marking and actual pair of connectors are confirmed in the answer. If a discharger is already installed on the object, attach its designation and photos of both connections: when replaced, this information helps to maintain a clear line configuration.
How to read connectors when purchasing
| Configuration | What to compare with your line |
|---|---|
| LP-350A: SO-239 / SO-239 | Two outlets; appropriate connections from existing cables are needed |
| LP-350B: PL-259 / SO-239 | Plug and socket; actual response parts are checked on both sides |
| LP-350 without suffix | Clarify the marking of the proposed item before inclusion in the specification |
| Designation of the UHF connector | Save the full connection type; specify the operating frequency with a separate parameter |
| Intended adapter | Identify a specific position and its role, do not consider the unknown adapter part of the kit |
The general clause “UHF connector” does not describe where the plug is located and where the socket is. Two customers with the same radio may have different feeder terminal connections. Specify your line, including the transition elements already installed. The name of the connector type also does not replace frequency: these data perform different tasks in the selection.
Which means 300 W PEP
The general table of the OPEK family indicates the frequency range DC-500 MHz, wave resistance 50 Ohms and a maximum power of 300 W PEP. The suffix PEP means peak envelope power. It is important to keep it next to the number when transferring parameters to the application.
This string is not a validated resolution to continuously transmit 300 W in any mode. For selection, inform the actual capacity of the equipment, the type of work and the nature of the load. If the project provides for a long transfer, the admissibility of the selected configuration must be agreed upon according to the applicable documentation. One common family parameter does not cover all the conditions of your object.
The DC-500 MHz record refers to the published frequency characteristic. If the power supply of another device is supplied via the antenna cable, include this in the system description. From this line alone, it is impossible to derive the permissible voltage and current of such power supply through a particular LP-350.
The product is selected for the existing path
Describe the station, the outdoor antenna, the feeder and the intended location of the discharger in the project. For the current point it is useful to distinguish between a purchase for replacement and a change in the line: in the first case, the data of the previous position is important, in the second - the composition of the new site. The length of the route and the available connections pass to the specialist responsible for the selection.
LP-350 is discussed as a component of the antenna path. It does not replace the project of grounding, installation and protection of the facility and does not confirm full protection against any thunderstorm event. The quotation separately defines the product itself and the necessary work. If you already have a project, use its requirements instead of the universal scheme from the short review.
What the photo shows and what is documented
The catalogue image reads OPEK and LP-350, but the designation A or B is not installed. Selecting a suffix only on this image is impossible. When ordering, ask to confirm the marking and connectors of the proposed product; the information must then match the line of the agreed specification.
Separately list the required accessories and documents. For example, the mount cannot be considered to be switched on automatically: the manufacturer describes the mounting accessories as additional. When received, it is the agreed components and configuration that are compared, not just the familiar shape of the housing.
Application for which you can prepare a price
“OPEK LP-350 is required for [station/object].” Operating frequencies - [data], power and mode - [description]. Sides of the line - [types of connections]; diagram and photographs are attached. Please confirm A/B, composition, documents and current quotation for [quantity]. Receipt is [city].”
For an application from Moscow or delivery to a facility in Novosibirsk, the actual address of receipt and the requirements of the receiving party are important. They help harmonize logistics; a local warehouse or fixed term is not promised by this review. LP-350 is on the provided dated statement, but the available quantity and configuration are confirmed again when preparing the quotation.
Below the main product is LP-350. The BC-100 is left as a standalone position for the stationary antenna part, while the Motorola GM340 VHF is left to discuss the work post. These are subject transitions to goods, not a ready-made scheme with the promised compatibility of all components.
Receipt and approval of delivery
To request, specify the city and address of receipt: Moscow, St. Petersburg (Peter), Novosibirsk, Almaty or another point of Russia and Kazakhstan. The amount for each configuration, composition, current availability, cost and term are confirmed in the quotation.
Frequent questions about LP-350
How to choose LP-350A or LP-350B?
According to OPEK, A has two SO-239, B has PL-259 and SO-239. Verify the response parts of the line and confirm the suffix of the proposed product; the overall image of the LP-350 does not establish it.
Can 300 W PEP be considered a continuous power of 300 W?
Nope. The manufacturer specifies PEP. Actual mode, power and long-term validity are agreed for the selected configuration.
What information do you need to buy an LP-350?
Equipment model, operating frequencies, power and mode, connections on both sides, line scheme, required composition, quantity and city of receipt.
Go to the product and request an offer
The basic position is LP-350 for requesting a specific configuration. The BC-100 and GM340 VHF are given for a separate discussion of the stationary kit; frequency, connection and power supply matching are agreed upon by design.
OPEK LP-350 - thunder discharger for antenna track
Catalogue photo with the designation OPEK LP-350. The A/B suffix is not readable; the specific configuration and pair of connectors are confirmed separately.
BC-100 - A separate antenna for a stationary point
Catalogue illustration of the BC-100 with radial elements. configuration, accessories and project compliance are confirmed in the quotation.
Motorola GM340 VHF - radio for a separate set
Motorola GM340 VHF. Full configuration, accessories and antenna connection are agreed for your workspace.
Request a quote · Call. Specify the equipment model, frequencies, desired composition, quantity and city of receipt.
