Buy MR-14U for the car: operating frequencies, magnet and antenna cable
The MR-14U is considered when a magnetically based external antenna is needed for a two-way radio. When buying, it is important to coordinate the work channels, machine, cable and connector of the station. This information allows you to select a specific configuration and determine what will be checked after installation.
Start with the exact name and current configuration
In the dated statement provided, MR-14U is associated with our Racio commodity position. Nana Official website of Racio Antenna MR-14U The characteristics of the VHF/UHF antenna are published. To order, it is important to match the product offered with this information, especially if it replaces an item purchased several years ago.
Manufacturer allows changes in characteristics and configuration, so the coincidence of the short name does not confirm every detail of a particular delivery. The quotation fixes the marking, parameters and composition. If the previous MR-14U is preserved, attach photos and connection data; do not transfer the description of another externally similar variant without reconciliation.
Work channels are more important than a wide range in the title
The current Racio page lists a range of 136-500 MHz. This record helps to start matching, but does not prove the same matching at each frequency of the entire band without tuning. For your task, you need the actual transmission and reception channels, as well as accurate configuration radio.
For example, a car for one VHF network and a machine for another UHF task may require different application and verification conditions. Provide a full set of frequencies, not just one of them or the word “Motorola”. If the park is divided into groups of channels, make separate lines: so the selected accessory will remain associated with a certain work kit.
What is published by Racio and what to clarify in the order
| Racio's current information | Question for your purchase |
|---|---|
| 136–500 MHz | What work channels need to be agreed upon and verified |
| Magnetic base 95 mm | What is the surface and place of installation offered on the machine |
| Cable 4.5m | Is the route from the selected base to the station appropriate? |
| UHF male, PL-259 | What is the actual antenna socket at your station? |
| Maximum power of 150 W | Confirm the proposed option and conditions for real power and mode |
| Antenna and base with cable | Set scope of supply and additional items required separately |
These are the values of the current official page, not the result of measuring our particular instance. The dated warehouse name also indicates the base of 95 mm, but one matching value does not establish the revision of the product. The set and working conditions are confirmed in the quotation.
Magnetic base is selected for the car
Send the type of machine, the material of the proposed surface and a photo of the place. The presence of a magnetic base in the model does not mean a suitable fixation on any roof, panel or superstructure. If part of the park has a different body design, do not combine it with the first agreed car only by the name of two-way radio.
Discuss whether permanent placement or transfer between machines is required, how equipment is stored and maintained. Speed, external loads and site conditions are evaluated for a specific installation. This review does not assign an unconfirmed magnetic retention limit or a universal location suitable for each machine.
Cable and connector are included in one subject query
For published Racio configuration specified cable 4,5 m and plug PL-259. Compare the length to the actual route: installing a station under the front panel and in the rear compartment can give different needs. The route is described in advance, including available inputs and equipment locations.
A photo of the installed station connector helps to coordinate the connection without guessing about the model. If a transitional position or other line composition is needed, it is indicated separately with the exact designation. The adapter solves the connection issue, but does not extend the confirmed frequency conditions of the antenna.
What to check after installation
To receive, it is reasonable to coordinate the verification of the installed antenna system via the CSV on the actual working channels, taking into account the station and installation. CSV characterizes the alignment of the path; the measurement conditions and the acceptable result are determined with a specialist for the selected kit. This is a recommendation for acceptance, not a stated factory setup procedure for the MR-14U.
Separately coordinate the control of work calls in the right conditions. A successful conversation at one point is not a guarantee of range on all routes. With a phased fleet, you can start with a typical machine and save the results along with its configuration; another roof material or installation scheme requires its evaluation.
How to order an antenna for your car
"Please request the MR-14U for [station model and configuration]." Channels - [network data], power and mode - [description]. The car and the surface are [information], the route of the cable is [description]. Photo of the nest attached. They need [amount] to get into [the city]. Please confirm configuration, composition, connection and verification conditions.”
For transport in Omsk or Yekaterinburg, specify the place of receipt and, if installation is performed separately, the responsible receiving party. Current availability and delivery conditions are confirmed by this application. Dated statement shows the initial commodity demand, but does not promise an unchanged quantity in the warehouse.
The following is the MR-14U; the Motorola GM340 VHF is listed as a stand-alone station to discuss the work kit. The LP-350 is an adjoining position for a different antenna line task, which is selected according to its own conditions; it is not required to automatically include it in each vehicle installation.
Receipt and approval of delivery
To request, specify the city and address of receipt: Omsk, Tyumen, Yekaterinburg, Astana or another point of Russia and Kazakhstan. The amount for each configuration, composition, current availability, cost and term are confirmed in the quotation.
Frequent questions about MR-14U
Is the MR-14U consistent across all frequencies 136-500 MHz?
The official page publishes this range, but not the frequency curve of the set. The work channels and the result of the check will be agreed upon for a particular station, antenna and machine.
Does the PL-259 fit any Motorola car?
There is no such universal compatibility here. You need a full model and configuration of the station, data or photos of the antenna socket and a coordinated connection solution.
What is included in the request for the MR-14U?
Operating frequencies, station, power and mode, machine type, surface, cable route, connector, desired composition, quantity and city of receipt.
Go to the product and request an offer
The main position is MR-14U for the selection of automotive antenna. The GM340 VHF is a standalone station for the work kit; the LP-350 is given for a standalone antenna line task and does not automatically switch on to each machine.
MR-14U - Magnetic-based automotive antenna
Catalogue illustration of MR-14U: emitter, base, cable and connector. The view does not set the exact version and setup to work channels.
Motorola GM340 VHF - radio for a separate set
Motorola GM340 VHF. Full configuration, accessories and antenna connection are agreed for your workspace.
OPEK LP-350 - thunder discharger for antenna track
Catalogue photo with the designation OPEK LP-350. The A/B suffix is not readable; the specific configuration and pair of connectors are confirmed separately.
Request a quote · Call. Specify the equipment model, frequencies, desired composition, quantity and city of receipt.
