ATU-16K: 300-340 MHz antenna and pre-order configuration check

Request a quote

The ATU-16K in our catalog is presented as an antenna for the 300-340 MHz segment. If you want to replace this accessory, start with the full code of the existing antenna and configuration radio. This data is needed for a single purchase, and for the purchase of a reserve.

ATU-16K: configuration 300-340 MHz from the catalog — Catalogue illustration of the antenna family Vertexwithout legible markings ATU-16K. The range and compliance of your station are confirmed by the proposed configuration.

What is 300-340 MHz in this card?

This is the range indicated for the ATU-16K position in our catalog. The official VX-450 and EVX-530 manuals have not confirmed the ATU-16K configuration. Therefore, the quotation for the purchase is prepared for a specific product: its marking, frequency information and documents of the corresponding configuration station are checked.

This approach allows you to discuss the desired product, without replacing it with any externally similar accessory. If the previous antenna is designated ATU-16K and was used in the current kit, save this code in the application, along with the data of the two-way radio. If there is no code, it is better to send information about the device and its configuration than to choose only from the photo.

What data helps to coordinate a purchase

Buyer data	What do you want to clarify?
Full model and configuration of the station	What equipment is available, including regional
Marking of the old antenna	Is there a full ATU-16K code or other designation?
Frequency used	Compliance with the required work and the claimed product section
Photo of the anchorage and documentation	Data for comparing a particular set
Number and place of receipt	Composition of the quotation and the terms of your delivery

To request it is enough to start with this information; to disassemble the station for the photo is not required. A snapshot of the nameplate and the available labeling of accessories is usually more useful than the general look of the workplace. If the documentation is kept by the service organization, the agreed code can be specified from the previous specification.

Why Family Names Aren’t a Replacement for Configuration

In the park there may be similar names of stations with different ranges. The request for “Vertex VX-451 antenna” helps to find direction, but does not confirm the ATU-16K for any such device. We do not transfer information about the standard version of the other band to regional equipment 300-340 MHz.

The same applies to EVX-530 and other series: the coincidence of the general appearance or the ability to install a similar product does not yet give a confirmed compatibility list ATU-16K. For purchase, fix the correspondence of your station and the proposed antenna. If it cannot be established yet, the required data are clarified before agreeing on the position.

How to distinguish ATU-16K from neighboring antennas

In our catalog separately placed ATV-16A and ATV-16C. The official documents for them are indicated VHF-plot 136–150 and 162–174 MHz. These positions help to compare needs, but are not a substitute. ATU-16K One fact of belonging to the family of handheld antennas Vertex.

When transferring codes, save each letter. The designation ATU-16KS also cannot be silently abbreviated to ATU-16K: if it is on the previous product or on the statement, report it in its entirety. Differences of configuration are discussed separately; there is no promise of the same work on the similarity of the name of the grounds.

Purchase of one position and purchase for the group

For one station, specify its inventory number and the replacement antenna code, if known. For several devices, make lines by configuration and operating frequencies. Then the quotation can be associated with specific sets, and when received, distribute the products without re-searching who is intended for which.

Determine in advance whether replacement of damaged accessories, reserve for maintenance or equipping new jobs are required. In the first case, photographs of the surviving products are useful; in the latter, the complete specification of the stations will be required. The amount in the application is determined by your need. The balance, cost and delivery time are confirmed in the preparation of the quotation.

Ready list of requests

“We want to buy ATU-16K, the position of your catalog 300-340 MHz. two-way radio — [model and configuration], the active antenna — [full code], operating frequencies — [network data].” Required [quantity] for [replacement/reserve/new seats], getting into [city]. Photos and information about the set are attached. Please confirm the specific configuration, compliance and delivery conditions.”

If certain documents, product condition or packaging composition are important, include this in the letter. Specifying the code in the application name speeds up the subject response, and information about the station helps to agree on the desired configuration. The catalog illustration below shows the overall appearance of the family, without readable labeling. ATU-16K.

Direct link to our ATU-16K card; neighboring ATV-16A and ATV-16C are reserved for customers with separate VHF needs. You can request several positions in one letter, saving separate lines and parameters for each set.

Receipt and delivery

To request delivery, specify the city and address of receipt: Yekaterinburg, Omsk, Kazan, Astana or another point of Russia and Kazakhstan. The amount for each configuration, availability, cost and term are agreed in the quotation.

Questions before buying

Is the ATU-16K range confirmed here by official management?

300-340 MHz – information about our catalog position. A separate configuration of the ATU-16K is not confirmed in the read official manuals; the data of the proposed product is specified for order.

Does the ATU-16K fit any Vertex VX-451?

Such universal compatibility is not established here. You need a full station configuration, operating frequencies and data of a specific antenna.

Can you replace the ATU-16K with the ATV-16A or the ATV-16C?

The ATV-16A and ATV-16C have other frequency bands specified by the manufacturer. They are not offered as a replacement for the ATU-16K family.

Materials for the selection of the work kit

Manufacturer documentation: ATV-16A, Motorola Solutions; VX-450 management (printed page 41, PDF 42); EVX-530 management (print page 47, PDF 48). These documents confirm ATV-16A and ATV-16C for the specified VHF-configuration. The indication ATU-16K 300-340 MHz refers to our catalog position; the exact compatibility of this variant is agreed on by its passport and marking.

Go to the product and request selection

Choose the main position for your task. Neighboring antennas are presented for comparison; a suitable configuration is selected based on a specific two-way radio model and its operating frequencies.