MR-14U and a low garage entrance: vehicle clearance with the antenna fitted
A two-way car radio can be correctly selected for the network, and a machine with an installed antenna can not pass into the usual box. For service transport, this is a daily restriction: after leaving, you need to return to the garage, drive under a canopy or stand in a closed parking lot. When selecting an MR-14U, such a route should be included in the pre-purchase request, along with the vehicle model and antenna location conditions.
Passport height of the antenna and the size of the machine
The official Racio page for the MR-14U shows a height of 55 cm. This is a characteristic of the model, not a ready-made answer about passing a specific gate. The solution requires the size of the car with the proposed antenna at the agreed installation site. One body height or a photo of the product is not enough. The height of the support surface, the superstructure, and the actual position of the antenna installed must all relate to the same machine configuration.
You should not add any two values from different descriptions: in one document, the height of the car can take into account the trunk, and in another, the measurement refers to another configuration. Find out what type of car and what condition of equipment is compared with the passage. For several cars, the same two-way radio does not mean the same upper dimensions.
Check the entire normal route
In the application, it is useful to list the box, entrance gate, canopy and enclosed parking, which the car uses regularly. The actual height limit on this route will be decisive. The size of the gate according to the construction plan and the available travel in the working position may vary, so the initial data will be agreed with the site manager.
If the permanent placement of the antenna does not meet the entry conditions, it is a matter of deciding before purchase. With the responsible installer, another configuration or agreed operating procedure is discussed. The magnetic base itself does not confirm the folding mechanism, the admissibility of touching obstacles or the appropriate size. Such properties cannot be added to the order based on the generic name MR-14U.
What to fix in the quotation
Specify the car, the intended location of the antenna, the confirmed size and minimum height of the required passages. Separately write down whether the machine should pass there in unchanged working form. So the supplier and the receiving party discuss the verifiable operating condition, not just the length of the pin. Operating frequencies, connection and placement of the cable remain separate conditions; their detailed selection is discussed in the previous material.
MR-14U kit and price
For the order, a set is considered: the MR-14U antenna and a magnetic base with a cable. Such a composition is specified by the manufacturer; the reference point of our card is price on the product page. configuration, the actual completeness, condition, availability and final cost are confirmed in the quotation. The necessary adapters and works are agreed separately, without automatic inclusion in this price tag.
Send the number of kits, car details and the receipt address. For delivery to Kazan, Belgorod, Astana or another city of Russia and Kazakhstan, specify the required date. An antenna photo helps to find out the type of product, but is not a measuring drawing and does not replace the size check of the machine.
Car, travel and order condition
- Car with antennaConfirm the size for a particular machine and installation site.
- Normal routeClarify the available height of the box, gate, canopy and parking.
- Agreed orderSet a suitable configuration and operating conditions.
Scheme of order preparation, not a measuring drawing or installation instructions.
| Background data | What's the deal? |
|---|---|
| Car | Model, superstructure and condition for which the size is indicated. |
| Antenna | Configuration and the actual position of the installed set. |
| Passage | Minimum available height on the desired route. |
| Working condition | Do you need to enter with the antenna in the fixed form? |
Questions before ordering
Can I determine the passage of the gate from the MR-14U photo?
Nope. We need a confirmed size of the car with the installed antenna and the actual restriction of travel.
The manufacturer's 55 cm is the height of the entire machine with the antenna?
This is the antenna feature on the model page. The size of a particular car with an installed set is determined separately.
Magnetic base means the antenna folds in front of the gate?
The presence of a magnetic base does not confirm this. configuration and acceptable order of operation are agreed separately; a folding mechanism is not promised here.
Our MR-14U kit
The price refers to the MR-14U set with magnetic base and cable. configuration, condition and composition are confirmed in the quotation; additional positions and works are agreed separately.
Request a quoteMR-14U: operating frequencies, base and cable
Manufacturer's documentation: Racio: MR-14U - model height and completeness.
